| Customization: | Available |
|---|---|
| Manufacturing Process: | Hand Made |
| Surface Treatment: | Without Processing |
|
Still deciding? Get samples of US$ 500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PP Demister Plastic Mesh Demister Pad Wire Mesh Demister
Knitted wire mesh,vapor-liquid mesh, mist eliminating mesh, knitted wire mesh for demister, shielding metal wire mesh,shielding wire mesh
PP plastic mesh pad is a kind of wire mesh knitted in particular type. Mist eliminator is used for wire mesh demister, oil-gasseparator, dust remover,dedusting apparatus, environmental protection device, various separating and filtering devices, filtering eliminate for auto and tractor, sealing, shock absorption, muffling and purifying components for auto, as wellas used for electromagnetic interference and shielding devices for electric apparatus.
Wire Size: 0.08mm - 0.30mm flat wire or round wire. Single-strand knitted, multi-strand knitted, metal & non-metal (various fibers) knitted wires may be pressed into various specification of corrugated wire as require.
Production Process of PP Demister Filter/ Wire Mesh Demister / Plastic Mesh Pad
PP plasticmesh demister pad, remove droplet by impingement on the wire surface. The liquid collected on the filaments is then able to drain from the pad under gravity. They have a limited range of useful operation in which they provide almost complete removal of droplets down to about 3-5 microns. Turndown range of vapor rate is around 3:1. At excessively high vapor velocities, the liquid droplets that impinge on the wire surface are sheared off by the vapor and re-entrained before they are able to drain.
Advantages:
1.High removal efficiency
2.Negligible pressure drop, less than 25mm of water gauge
3.No maintenance or service required
4.No corrosion or temperature limitations
5.Easily installed in existing vessels
6.No limitation on size or shape.
|
DEMISTER STYLE
|
DEMISTER FEATURES
|
|
Demister
H-Style
|
Can permit highest vapour velocities for mist load than any other styles. Used in case of low-pressure loss is required, or when
blocking-up may occur, or when the removal of larger mist or high efficiency is not required. Usually used 150 m/m thickness. As for the efficiency equivalent to SL-Style, used in 200 m/m thickness |
|
Demister N-Style
|
For all round use. It has 95-99% efficiency against 8μ mist at 1-5 m/sec velocity.
|
|
Demister
SL-Style
|
Used when high efficiency is required. Though pressure loss is increased slightly, it is considered to have 95-98% efficiency
against 3μ mist at 1-6 m/sec velocity. This S-Style is especially needed when approximately 90% efficiency at 1 m/sec velocity is required. |
|
Demister
T-Style
|
Used when removing of approximately 2μ-3μ mist. Especially when the entrainment is 1.0 gr/m³ or less; 200 m/m to 300 m/m thickness
is used. |
|
Demister
R-Style
|
Used for removing of every minute mist of approximately 1μ. The most efficient type for its thickness.
|
Can be used in gas-liquid separation in chemical, petroleum, sulfate, medicine, light industry, metallurgy, machine,
building, construction, aviation, shipping and environment protection.
Pingxiang Nanxiang Chemical Packing Co., Ltd was established in 2003, It is a professional manufacturer and exporter that has more than 20 years experience in Chemical Packing. We are located in West Section Hi-Tech Industry Park Pingxiang City, Jiangxi Province, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
1.Who are we?
){kind=link}