| Customization: | Available |
|---|---|
| Application: | Chemicals |
| CAS No.: | 9002-86-2 |
|
Still deciding? Get samples of US$ 10/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Cooling tower fill is one of the most important components for exchange of gas and water in cooling tower. It is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation. With the development of the plastic industry, counter current tower drench water plastic packing "S" shape ladder wave, obliquely wave, which has the heat dissipation, good performance, ventilated small resistance, durable, based on the easy and other advantages, it is widely used in different types of large, medium, small cooling tower.
Marley cooling tower fill fetures:
1. Improved water distribution
2. High thermal performance
3. Material meets Cooling Tower Institute
4.Mainly apply to Counterflow fill.
Technical Data:
MX Fill is available in MX75 configuration and higher-performing MX625 configuration. MX is a hanging film type cooling tower fill which spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow. This type of fill provides much more water surface exposure per cubic foot than splash type fill.
MX fill incorporates highly efficient cellular drift eliminators, integrally molded within the fill sheets. Compared with previous designs, these eliminators reduce drift emissions from the tower by a factor of ten or more! Less drift means tower owners save water bills and water treatment chemical expenses.
This fill virtually eliminates the nuisance caused by drift spotting on adjacent buildings and property. For additional savings, the drift eliminators discharge air directly toward the fan. Discharge air, traveling in the right direction when it leaves the eliminators, translates to lower fan horsepower.
Louvers are also integrally molded within the fill sheets preventing water from escaping and assuring precise air distribution throughout wide variations in airflow. Unlike towers equipped with separate external louvers, this fill operates virtually ice-free even in extremely cold weather.
MX fill is thermoformed from PVC with a flame spread rating less than 25 per ASTM E-84 and is considered selfextinguishing. Therefore, the risk of fire damage is minimal.
We have many years for exported Cooling towers filling, we are professional for installation and production .
PVC Marley Cooling Tower Weight:
|
NOMINAL GAUGE |
DRY WEIGHT |
||
|
mils |
mm |
lbs/ft3 |
kg/m3 |
|
10 |
0.25 |
1.8 |
28.8 |
|
15 |
0.38 |
2.6 |
41.6 |
Feature of cooling tower infill:
1. Greater cooling capacity in a given space
2. Low-clog designs available
3. Available in bottom supported or hanging designs
4. FM approval available
5. Crossflow and counterflow designs
6. Integral louvers and eliminators available in crossflow design.
7. High-temperature designs available
8. Single-piece, full-height counterflow designs available
1.Who are we?
){kind=link}