Honeycomb Ceramic Plate for BBQ Refractory Honeycomb Ceramic Heater Mullite Ceramic Honeycomb Ceramic Plate Ceramic Honeycomb Plate for Burner

• Customization: Available
• Material: Ceramic
• Source: Alumina/Cordierite
• Model NO.: NX-HCP
• Type: Refractory Matter
• Effect: Filtration
• Transport Package: Wooden Case
• Specification: Customzised
• Trademark: Nanxiang
• Origin: China
• HS Code: 6909110000
• Production Capacity: 5000000

Product Description

Introduction:

Infrared honeycomb ceramic plate is mainly made of special cordierite material. Because of the special design of the surface pattern of ceramic plate, it is more energy efficient in the use of gas cookers and heaters. Our infrared honeycomb ceramic panels are not only sold in China, but also exported to Europe and America and other countries, with good customer feedback.

Performance:

Infrared burner using honeycomb ceramic plate as combustion burner, in combustion and air fully premixed, to ensure complete combustion, so as to reduce pollutant emissions; Combustion through radiation transfer about 70% energy into infrared, this kind of infrared wave (2-4μm) is the most easy to be material molecules, polymer absorption, and has strong penetration, can stimulate water molecules resonance, heat can be evenly penetrated into the core depth of the heated matter, to ensure uniform heating effect, improve heating quality and drying efficiency, Therefore, the use of infrared burner heating, drying, heat preservation, aging treatment, heating has become a new process, new trend, it has been widely used in industrial paint, ceramics, food, printing and dyeing industries and various fields

Application:

Our Infrared Honeycomb ceramic plate are widely used in barbecue ovens, gas water heaters, fierce furnaces, rotary ovens, portable snack trucks, card stoves, gas heaters, outdoor heaters, drying equipment, etc. Because of the special pattern of ceramic plate, so that the working oven and heater more energy saving and environmental protection.



Advantages:

1. Based on infrared radiation heating, supplemented by convection heating, it can save 30%-50% of the use of gas and natural- gas than electricity.

2. Heating evenly, improve product quality of high quality drying, heating, reduce reject rate; Good hardness and seismic performance.

3. Fast temperature rise, can be fine-tuned temperature size, low noise in the ignition process, flame free combustion, combustion effect is significantly higher than ordinary ceramic sheet.

4. Low pollution, reduce 90% of harmful gas emissions, such as nitrogen oxides, carbon-monoxide, high safety.

5. The total cost is very low, the combustion surface can be installed in any aspect of the upper, lower and side.

Technical parameters:

Item	Data
Material	cordierite
Water absorption	>46%
Open porosity	45%
Specific gravity	0.45-0.65 g/cm3
Thermal efficiency	>68%
Coefficient of expansion	2.0-2.3x10-6
Wall thickness of hole	0.5-1mm
Diameter of hole	1-1.45mm
Thermal shock resistance	Ten times no crack
Seismic pressure	>10 Mpa
Temperature resistance	< 1280C
Surface temperature	1000-1200C
Carbon-monoxide release rate	≤0.006%
Nitrogen oxide release rate	≤ 5PPM

Square Shape Infrared Honeycomb Ceramic Plate

Diamond(mm)	132*92*13 134*94*13 135*94*13 162*60*13	150*135*13 134*46*13 136*50*13 128*88*13 129*74*13	133*131*13 129*89*13 134*78*13 200*140*13 186*134*13
8-Shape(mm)	132*92*13 134*94*13 140*95*13 131*88*13 132*79*13 144*74*13 139*110*13	172*123*13 164*74*13 162*73*13 132*88*13 144*73*13 180*132*13 180*130*13	147*142*13(1.4mm) 145*142*13((1.4mm) 145*118*13mm(1.1mm) 140*115*13 158*72*13(1.4mm) 105*72*13
Concave quincunx (mm)	210*149*13 162*73*13 162*60*13	162*62*13 164*74*13 142*72*13

Round Shape Infrared Honeycomb Ceramic Plate
 

Hole Pattern	Size
Round Hole	Φ100mm Φ150mm Φ158mm Φ160mm Φ168mm Φ170mm Φ180mm Φ200mm
Square Hole	Φ50/54/56/60/70/80/90/95/100/110/114/118/150/155//160/165/168mm, also can do customize size and color